JiGO LT-223-10D Wire Connector
The LT-223-10D is a ten-in ten-out lever connector block on a DIN rail foot — ten independent through circuits in one rail-mounted body.
Ten through circuits is a whole multicore cable broken out at a single point. Each pair is electrically separate and lever operated, so the block does the job of a twenty-terminal row in a fraction of the rail width and can be rewired without a screwdriver.
What this connector is for
- Ten independent through circuits
- DIN rail foot for fixed mounting
- Lever operated — stranded wire direct, reopenable without tools
- Core order preserved across the block
Keeping the core order across the block is what makes it useful on a machine panel: the cable arrives in order on one side and leaves in the same order on the other, so a drawing stays usable.
Choosing and fitting
ATC India stocks the whole JiGO connector range — push-in connectors for solid wire, lever connectors for stranded wire, one-in-many-out distribution blocks, DIN-rail and surface-mounting versions, and the matching lever terminal blocks. Tell us the conductor type, the cross-section and the number of ways and we will supply the right part rather than the nearest one.
| Model | LT-223-10D |
|---|---|
| Product type | Lever connector block with DIN rail mounting |
| Ways | Ten in, ten out |
| Conductor | Solid or stranded conductor — no ferrule needed |
| Clamping | Spring cage operated by a lever |
| Mounting | Moulded foot for 35 mm DIN rail |
| Reusable | Yes |
| Strip length | Printed on the connector body — strip to the mark, no more and no less |
| Typical use | Panel and enclosure wiring where ten circuits are distributed from one rail-mounted point |
| Brand | JiGO |
| Supplied by | ATC India, Ludhiana, Punjab |
| Enquiries | +91 99887 74490 · www.arjuntradingcompany.com |
The LT-223-10D is used in control and machine panels, distribution boards, marshalling boxes and multicore break-out points.
- Solid or stranded? Push-in connectors are for solid conductors; lever connectors take stranded wire directly. Using the wrong type is the one mistake that causes trouble later.
- Strip to the printed mark. Too short and the cage grips insulation; too long and bare copper sits outside the housing.
- Pull-test every conductor after insertion. It takes a second and it catches the only fault this connector type allows.
- Availability: normally 7–10 days from confirmed order; fast-moving sizes are usually in stock in Ludhiana.
- Ordering: prices exclude GST. Call ATC India on +91 99887 74490 or send the model number through www.arjuntradingcompany.com for a quotation.
Genuine stock from our Ludhiana counter (trading since 1993). GST invoice on every order, courier anywhere in India.
Chat on WhatsApp
